BZ oil sludge treatment system BZ has developed a set of oil sludge treatment system, its main purpose is to reduce the quantity, reduce the amount of treatment,and save costs.The BZ miniaturized sludge separation unit is integrated with several systems, including homogeneous mixing system, automatic dispensing and denting system, material conveying system, solid-liquid separation system, effluent conveying system, etc., so as to realize the reduction and disposal of sludge. Homogeneous mixing function:the material is fully stirred by agitator, so that the material keeps uniform characteristics, At the same time, the homogeneous mixing system is equipped with electric auxiliary heat function, which can heat the material and change the heating sheet at any time according to the demand to improve the heating rate. Automatic dispensing dosing function: have two drug storehouse, the three dosing point,Able to added chemicals to the homogeneous mixing system, material conveying system front-end, solid-liquid separation system inlet at the same time, adding automation control, operating only in the process of establishing operation parameters. control cabinet are connected by quick plug power supply, and ensure that switch of material pumps in the shortest time and two pumps are one in use and one standby during the operation of the system. Solid-liquid separation function: the separation factor can reach more than 2000G, can separate more than 5um of solid particles by 360mm diameter large drum centrifuge.frequency conversion control system, easy to operate and understand. Release buffer discharge function: the tank can buffer and store 4 cubic liquid, the release material is discharged to the designated place by centrifugal pump. screw conveyor is installed at the slag outlet at the bottom of the solid-liquid separation system, which can discharge produced slag body to the cuttage box and transport vehicle.then the water can be recycled, the oil can be pulled to the refinery and sold, and a small amount of the slag can be pulled to a pyrolysis plant for incineration or biodegradation.
